CRC RED URETHANE 300G

Electrical / electronic insulator 
Description:
CRC Red Urethane is a stable single component polyurethane coating for electrical and electronic applications. It dries fast, adheres well and forms a hard, durable, flexible and non conductive film for electrical motor windings and armature coilsCRC Urethane Seal Coats 
Electrical - Electronic Coating Insulator

Pack Sizes Available 
Aerosol 300 gm Red [2044]

CRC Urethane Seal Coat is an excellent adhering one-component polyurethane coating. Its mar and abrasion resistant insulation acts as a protective film, for electrical and electronic applications.

CRC Urethane Seal Coat is a stable single component polyurethane coating that dries fast, adheres well and forms a hard, durable, flexible and non conductive film. There is no mixing, it eliminates excessive waste, its easy to apply and saves time and labour. It also resists shocks, abrasion, salt air, humidity and aggressive chemical atmospheres.

CRC Urethane Seal Coat has a high dielectric strength, a high surface and volume resistivity which, when combined with a low dielectric constant and dissipation factor, are necessary for successful electrical and electronic applications. In the red version a special iron oxide pigmentation system yields additional film resistance without sacrificing electrical values.

Ideal For:

Protective coating for printed circuit boards.
Coating for: Electric motor windings, armature coils, boxes, controls, commutator ends, terminals, housings, transformer connectors, bus bars, solenoids, tools.

Approvals

USDA Authorised for use in Federally inspected Meat and Poultry Plants.
NSN 5970-01-017-5738 RED; NSN 5970-01-101-7019 CLEAR
Physical Properties
Flash Point (Open Cup) 43°C 
Specific Gravity (20°C) 0.86 ± 0.02 
Viscosity (25°C) 50cps 
Elongation 10% 
Temperature Resistance Should not exceed 100°C 
Dielectric Strength (ASTM D877) RED - 2000 Volts/Mil; CLEAR - 3000 Volts/Mil 
Dielectric Constant 4.04 at 60Hz; 3.77 at 10Hz; 3.23 at 10Hz 
Volume Resistivity; Surface resistivity 8.4 at 10 ohms/cm; 1.2 at 10 ohms/cm 
Oil Resistance Passes ASTM D115 
Average Film Thickness Passes ASTM D115

Test Results
Adhesion (Bell Laboratory Test) Exceeds 10,000g

You may also be interested in this/these product(s)

CROWN BATTERY TERMINAL COATING 6005 USA

CROWN OFF-LINE CONTACT CLEANER 8276 USA

CROWN ELECTRONIC COMPONENT CLEANER 8376 usa

CRC CO CONTACT CLEANER AUST